Print This Page

Home Electrical & Electronics Sensor Infrared Sensor

Wolf Guard Wireless Anti-Theft Alarm Detector Motion Sensor PIR Detector From Wolf-Guard

Function Type:	Infrared Range and Communication System
Detection Type:	Photon Detector
Output Signal Type:	Analog Type
Production Process:	SemiConductor Integrated
IP Rating:	IP30
Certification:	CE

Customization:	Available \| Customized Request

Contact Supplier

Contact Now

Inquiry Basket

Shenzhen Chitongda Electronic Co., Ltd.

Manufacturer/Factory, Trading Company

Gold Member Since 2006

Suppliers with verified business licenses

Rating: 5.0/5

Guangdong, China

Audited Supplier

to see all verified strength labels (33)

Product Description

Company Info.

Basic Info.

Model NO.

HW-03D

Customized

Battery

1 Year

Type

Infrared PIR

Transport Package

100PCS /CTN

Specification

CE, FCC, ROHS, OEM/ODM Services for 17 years

Trademark

Wolf-Guard

Origin

China

HS Code

85319010

Production Capacity

200000 PCS/Month

Product Description

Wireless anti-theft alarm detector Motion sensor PIR detector
from Wolf-Guard HW-03D

1. Brief introduction
This product is a special home and business PIR detector with delicate and modern design (appearance has patent), adopting the latest technology of smart logic IC and high-performance sensor to achieve high stability and avoid alarm failure (please contact us for customized design if anti-strong light is required).

Wolf Guard Wireless Anti-Theft Alarm Detector Motion Sensor PIR Detector From Wolf-Guard

Wolf Guard Wireless Anti-Theft Alarm Detector Motion Sensor PIR Detector From Wolf-Guard

*Hang on the PIR detector to the bracket and fix it to the wall by screws in the standard pack kit. Keep it 1.8-2.5M above the ground, and then adjust detecting angle and direction.

* Check the detecting area and distance by walking test until the whole defense zone is covered.

* . If it is necessary to adjust parameters, please first remove the cover and take out the batteries. Please use screwdrivers to take out screws of the bottom cover.

* Separate the bottom cover as the above picture shows.


*. Adjust re-detecting time to 5 seconds, 50 seconds, or 5 minutes. This time means the interval between two contiguous alarms.
   Trigger time interval:
   1&2 short connect: 5 seconds (default)
   2&3 short connect: 50 seconds (normal mode)
   No short connect: 5 minutes (time-saving mode)

*. Parameters such as oscillation resistance can be adjusted in the corresponding position of PCB board.
   1&2 short circuit: 1.5M
   2&3 short circuit: 3.3M
3&4 short circuit: 4.7M (default)

2. Installation
l        Detectors should be installed on the wall 1.8-2.5m above the ground (please refer to picture 4).
l        Adjust detecting angle, try to make it face window and keep it vertical with walking direction (please refer to picture 5).
l        Keep it away from heat, air conditioners and air convection areas (or close the door/window when arming).
l        No obstacle or floating object is allowed (such as flower, grass, clothes and curtain that will be easily be waft by wind) in the detecting area.
l        Detectors should be installed firmly without any waving and shaking.
l        Don't install it exposed to direct sunlight.
The above requirements are primary to avoid false alarm and alarm failure, please pay attention when installing.

3.      Test and Coding
l        Set the alarm panel to coding status (please refer to the alarm panel manual), then trigger the detector by hand (or walking in front of the detector) to make it send wireless signal to the alarm panel for coding.
l        After successful coding, install the PIR detector. Please pay attention to the installation height and detecting area. Make sure the switch is powered on after adjusting angle and height.
l        After installation, please follow the 5th point in Part 1 for walking test until the best defense effect is achieved.

4. Indicator
Green indicator on: sensor is triggered and send alarm signal
Red indicator on: battery is in low power status, please change it.

5. Technical Parameters
Sensor: Passive IR sensor with low noise
Working voltage: DC6V, (4pcs AAA 1.5V dry batteries)
Static current: <60uA
Alarm current: <20mA
Working Temperature: +5~+45ºC
Humidity: ≤95% (no fog)
Transmitting frequency: 315/433+0.5MHZ
Transmitting distance: no obstacle 80M
Detecting distance: 12M max
Detecting angle: Horizontal 110°, Vertical 60°
Coding method: PT2262 or EV1527 optional
Dimension: 112*60*38mm
Wolf Guard Wireless Anti-Theft Alarm Detector Motion Sensor PIR Detector From Wolf-Guard

Send your message to this supplier

*From:

*To:

*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for?  Post a Sourcing Request Now

Find Similar Products By Category

Supplier Homepage Products Wireless Accessories Wolf Guard Wireless Anti-Theft Alarm Detector Motion Sensor PIR Detector From Wolf-Guard

Hot Searches

PIR Detector bulkbuy

Product Groups

More Product Catalogs

Contact Supplier

Contact Now

Inquiry Basket

Shenzhen Chitongda Electronic Co., Ltd.

Gold Member Since 2006

Suppliers with verified business licenses

Audited Supplier

Rating: 5.0/5

Manufacturer/Factory, Trading Company

Management System Certification

ISO 9001, ISO 9000

Terms of Payment

LC, T/T, PayPal, Western Union

Wolf Guard Wireless Anti-Theft Alarm Detector Motion Sensor PIR Detector From Wolf-Guard

Contact Supplier

Product Description

Company Info.

Basic Info.

Product Description

Send your message to this supplier

Find Similar Products By Category

Hot Searches

You Might Also Like

Product Groups

Contact Supplier