ITEM:QG-08B
wire LED Gas Detector
NEW WiFI/Wired Smoke +Temperature detector
FUNCTION:
Normal state: green power indicator is steady on, yellow and
red indicators are off, and buzzer is silent.
Fault status: yellow fault indicator light is steady on, and
buzzer beeps for a long time, indicating that sensor is faulty.
Fault status: yellow fault indicator is flashing, indicating that
sensor life has expired.
Alarm status: red alarm indicator flashes rapidly, and buzzer
sounds rapidly.
Gas detection:
The detector collects, analyzes and judges the air in using
environment continuously. When the concentration of combustible
gas in the air reaches alarm threshold, MCU in detector analyzes
the concentration of gas and diffusion trend of gas. When
confirmed belonging to a real gas leakage event, detector will light
up red warning light and start the buzzer immediately.
Alarm handling:
When detector alarms, open the windows to circulate indoor air
immediately , extinguish all fire sources, do not create fire
sources, avoid switching on/off various electrical appliances,
check cause of gas leakage, and ask professionals to repair in
timely.
Silencer:
In the alarm state of detector, press "self-test/silence" button,
detector can be silenced; in silencer state, red LED is steady on,
and the silencer state can be maintained until detector returns to
normal monitoring state automatically. Or press mute button again
to exit the mute state.
Reset:
In alarm state, press "disarm" , detector can be reset manually.
See the table below for fault analysis and troubleshooting.
When the sensor of this product exceeds its service life (3 years),
please check and confirm whether it needs to be replaced in timely.
The company is not responsible for the warranty in one of the
following situations:
Technical Parameters
1.Gas sensor:Good linearity,high stability,long life.Small size, simple installation, easy to use.3.Built-in buzzer. with alarm sound function:8888 operation,Alarm, fault status: With LED status indicator.it can intuitively indicate normal
Intuitive and simple operation keyswith self-test function; 6.Built-in RF 433MHz 2262 protocolwireless linkage with host alarm Disarm
2 Structure
Control output interface:
The detector has a control output interface which is used to start the solenoid vaive or manipulator after the detectoralams.The output interface adopts 2P buckle terminal and the output current is 1A.
Product appearance
Power supply:9V~12VDC Adapter
In-builtbattery:7.4V/500mArechargeable Li battery
Working Current: 120mAunder monitor state Li battery charging current<100mA Siren Volume:85dB
Wire support
TransmissionDistance:>80M(noobstacle) Alarm output voltage:5VDC Temperature:-10C~+60ºC Humidity:95%(40+2ºC) Size:12.5x45x45mm
![Gas Leakage Detecter](//www.micstatic.com/athena/img/transparent.png)
![Gas Leakage Detecter](//www.micstatic.com/athena/img/transparent.png)
![Gas Leakage Detecter](//www.micstatic.com/athena/img/transparent.png)
![Gas Leakage Detecter](//www.micstatic.com/athena/img/transparent.png)
Installation
DeviceshouldbeinstalledproperlyforLPG such heavier-than-air gas detection please installitover 30cmdistance fromfloor:and for naturalgas such lighter-than-air gas,keep it 30cm distance from ceiling. Both two installation conditions should keep the
device within 2 meter distance from cooking instruments.
RFQ
1. Are you a factory or trading company?
We are a professional manufacturer established in 1998 with more than 21 years experience in security&protection industry.
2. How can I get a sample to check your quality?
Sample order is acceptable. Please contact us for more details.
3. What's the Payment?
- T/T would be better with quick transfer and few bank fees.
- L/C, Western Union and Paypal. VISA, MasterCard are acceptable.
4. How long is your delivery time?
- 1-3 working days for sample order
- for general order, 3-20 days after advanced payment
Please contact us for more details.
5. What about the warranty?
- For the strobe/sensor, we provide 18 months warranty; parts of are 2 years.
- for the alarm panel, we provide 36months warranty.
6. Where is your factory locate? How can I visit there?
Our factory locates in Shenzhen, in China, Near Hongkong and Guangzhou. We are warmly welcome you to visit our factory and cooperate with us.
7. What's your advantage? Why we choose you?
- Factory price. Over 21years experience in this industrial area
- Great production capacity, support OEM&ODM
- 100% new materials, with defective rate lower than 0.2%.