GSM Auto-dial Burglar Alarm System: Single GSM Network; Support GSM/CDMA mobile phone; Auto-dial alarm function; Remotely arm, disarm, panic alarm and two-way intercom.
Main Features of GSM Burglar Alarm System YL-007M3X:
1. Adopt GSM communicator, no distance limit to alarm.
2. Support GSM/CDMA mobile phone.
3. Can per-set 5 phone numbers of user/ police/ monitoring center (no longer than 16 character each number). If an alarm occurs, numbers will be dialed in order.
4. Remotely arm, disarm, panic alarm and two-way intercom.
5. Control the system by a mobile phone anywhere, anytime. But need to input a PIN code for security reasons.
6. Supports all kinds of wireless/ wired sensors (NC contacts), such as PIR detectors, door (gap) sensors, gas sensors, smoke sensors, panic buttons and infrared balusters.
7. For weak GSM signal area an external antenna can be used.
8. 2 open collector outputs available to be used according to customer demands
9. One onboard relay available for customer application.
10. Easy to be installed and operated.
11. Built-in battery can continue to work for 8~10 hours when power off.
12. No need for fixed telephone line, only GSM Network is present, so is very suitable for cottage, house, shop, garage etc.
Technical Parameters:
* Operating Voltage: DC 12V
* Static Current: ≤ 20Ma
* Alarm Current: ≤ 400mA
* Wireless Receiving Frequency: 315/433MHz± 0.5MHz
* Wireless Receiving Sensitivity: 315/433MHz± 0.5MHz
* Anti-interference: 1V/m(frequency: 20-1000 MHz)
* GSM frequency: 900/1800MHz
* Outer Alarm siren volume: 110dB
* Working condition: Temperature: -10~40
* Humidity: ≤ 90%
* Capacity for wireless device: 10PCS
* Wire device: 3PCS
Standard Pack Components:
1 x main panel
1 x wireless PIR sensor
1 x wireless door sensor
1 x siren
2 x remote controllers
1 x power supply
1 x manual
){kind=link}